Automatic Sensor Cleaner
Non-Contacting Conductivity Sytem
The Q46CT Monitor employs an inductive
(toroidal) sensor that allows measurement
in difficult samples with virtually no
maintenance. The toroidal sensor is a molded
assembly made from Noryl, an engineering
thermoplastic with excellent resistance to
both strong acids and strong bases.
;; Good Performance in Dirty Applications
;; Multiple Monitoring Configurations
;; Easy Calibration
Proven Measurement Approach
The Q46N uses reative chemistry that
converts ammonia in solutions to a stable
monochloramine compound equivalent
in concentraion to the original ammonia
level. The measurent is then made with a
proven amperometric sensor.
;; Ne w Approach to On-Line Ammonia Measurement
;; Total Ammonia Measurement
;; Optional Free and Monochloramine Measurement
Internal Data Logger
Model D12 Gas Transmitters provide the
ultimate in application flexibility.
Loop-powered or 3-wire models with
on-board relays are available, as are both
combustible gas and universal toxic gas
versions. Digital communication using
Hart TM or Modbus TM protocols are available.
;; Interchangable “Smart Sensors”
;; Internal Data-Logger
;; Optional Sensor Daily Auto-Testing
Interchangable “Smart Sensors”
PortaSens II C16 Detector provide a flexible
tool for locating the source of toxic gas leaks
from storage cylinders, process machinery, gas
generation equiptment or piping systems. Smart
interchangable sensors allow one instrument
to be used for a variety of gas detection
requirements. Data-logger come standard.
;; Interchangable “Smart Sensors” for Over 30 Gases
;; Internal Sample Pump and External Sampling Wand
Keep Chemical Costs Under Control
The Q46S/66 Monitor take a unique
approach to the measurement,
employing a unique gas phase
method to continuously monitor
sulfite values without contact
between the sensor and the water
;; Gas Phase Sensing - No Contact Between Sensor & Sample
;; Internal Sequencing & Relay for Auto Sample Line Cleaning
;; Low Maintenance & Low Reagent Useage
ATI’s New Q46D Dissolved Oxygen System with Q-Blast Sensor Cleaner provides reliable D.O.
measurement using either optical or membrane sensors. The Q-Blast D.O. System is ideal
for aeration control system, resulting in improved process performance and energy savings.
Installation is simple and maintenance is lower than any competitive system.
This system also works with our NE W Q46P/R monitor with reliable pH / ORP measurement.
The Q46H/79 provides highly
accurate measurement of total
residual chlorine down into the parts
oer billion range. Total Chlorine is
measured using EPA recommended
method for reaction of the sample
with buffer and KI.
;; Direct Reading Membraned Amperometric Idodine Sensor
;; High Accuracy and Sensitivity Down to PPB
;; 2-Assignable 4-20 mA Outputs for Chlorine, Temp or PID
VISIT US AT THE 2013 WEFTEC! Booth #2267
Circle 153 on Card Circle 151 on Card Circle 147 on Card
Circle 148 on Card
Circle 149 on Card
Circle 150 on Card