ATI’s C16 PortaSens II portable leak detector is used
to check for gas leaks in storage areas, around
process equipment and piping, and in confined
spaces prior to entry. The detector contains an internal sample pump and a flexible sampling wand
to allow pinpoint location of the source of leakage.
A unique feature of the C16 detector is its ability to
measure over 30 different gases by simply inserting
the appropriate sensor into the detector. — Analytical Technology
Inc., 800/959-0299, www.analyticaltechnology.com
Circle 97 on Card or http://pen.hotims.com/69825-97
Gas Detection & Monitoring:
Measured & Processed in Real-Time
The Jerome® J605 uses gold film sensor technology to detect hydrogen sulfide gas (H2S) at concentrations as low as 3 parts per billion (ppb). It
also features a Survey mode to aid in pinpointing
the exact source of a hydrogen sulfide gas leak.
BeamIO offers a more cost effective, proactive,
aerial & mobile gas monitoring solution.
Early detection and risk management.
High-Resolution Survey Maps
While in Survey mode, the instrument samples the
air continuously, allowing the user to “sweep” an area for hydrogen
sulfide hot spots. — Arizona Instrument LLC, 800/528-7411,
www.azic.com Circle 98 on Card or http://pen.hotims.com/69825-98
3D Data & Map Visualization
CO2 / NO2 / SO2 (Air Quality)
Class I/Division I Hazardous Areas Gas
An explosion-proof gas monitor, Optio XP is rated for
Class I Divisions 1 & 2, and sets a new standard for
point gas detection in oil and gas applications – drill
pads, rigs, compressor stations, gas plants, transmission
stations and terminals – and in other industrial locations.
Contact us to learn more
Mil-Ram_Technology-Ad-110217-FIN.pdf 1 11/3/17 11:29 AM
Optio XP’s design and plug-and-play capabilities simplify installation,
calibration and maintenance. Its features address inherent problems
with current gas detectors, and provide unparalleled flexibility for
monitoring and detection in both indoor and outdoor applications
Circle 102 on Card or http://pen.hotims.com/69825-102
— Conspec Controls, 724-489-8450, www.conspec-controls.
com Circle 99 on Card or http://pen.hotims.com/69825-99
Benzene Specific Monitor
The Ion Science Titan is designed to specifically detect benzene in petrochemical environments and provide safety for plant and
workforce. Titan incorporates a PID sensor
with patented fence electrode technology,
making it well-suited for refinery applications, and offers increased resistance to
humidity and contamination. This minimizes
drift issues and extends run time, as well as
having a detection range of 100 ppb - 20 ppm.
— Ion Science, 877/864-7710, www.ionscience.com/titan
Circle 100 on Card or http://pen.hotims.com/ 69825-100
New Connected Gas Detector
The Sensepoint XRL fixed gas detector monitors industrial operations for specific hazardous
gases, such as carbon monoxide or methane.
Unlike other fixed gas detectors, Sensepoint XRL
is Bluetooth-enabled, meaning it can be set up
and maintained remotely using a smartphone
app. When paired with an intrinsically safe
smartphone a single worker can perform many
standard maintenance tasks, including set-up, commissioning, and
calibration wirelessly from up to 33 feet away. Sensepoint XRL and
the app also can quickly produce system reports necessary for safety
and environmental regulatory compliance.
— Honeywell Industrial Safety, www.honeywellsafety.com